Used to install Rivets Non-Self-Releasing 5/32, 3/16, 1/4. This nose can install the following kind of rivets: EN6122 & UAB130-EU EN6127 & UAB6127-EU EN6128 & UAB100-EU EN6129 & UABP-EU Recommended Rivet Guns: GB714BBK-10 (GB714) GB722…
TOOL, CONTROL COLUMN B757, LOCK ADAPTER,
Used to lock a control column in neutral during override force check.
RIGGING EQPT – CONTROL INSTALLATION
Used to establish the position of the horizontal stabilizer trim jackscrew during stabilizer and elevator system rigging.
GSE 437 SET-ADAPTERS, RIGGING FLAP
Used to aid in flap rigging.
CAL, MEASURING, PASS/DOOR B757,
Mounted in place of Passenger Entry Door Emergency Power Reservoir and used to provide resistive force and accurately measure actuation cable travel during adjustment and test.
LOCK T.E. FLAP PWR DRIVE
Used to lock the trailing edge flaps in an extended position to prevent inadvertent operation during maintenance.
LOCK SET – INBOARD GROUND SPOILER ACTUAT
Used to lock the inboard ground spoilers (numbers 6 and 7) in the fully extended position during maintenance operations. Contains 4 Lock Assemblies.
WRENCH SPANNER NLG REM/IS
Used to remove and install the NLG trunnion retainer nut.
GSE 179 TURNBUCKLE, HORIZONTAL STABILIZE
Used to improve the trimming procedure of the horizontal stabilizer and support the horizontal stabilizer during maintenance procedures.