Used when the fuel tank access is removed. The table has holes to place the fuel access on the table, avoiding the damage of these. Note: Racks are available in the interior of Hangar 1…
MANOMETER 0-5000PSI
Manometer used to measurement pressure up to 5000 PSI in maintenance tasks.
1″ DR SKT 1 #32 12-SPIN
Socket input 1" measure 1" (#32) used to install / remove screws and nuts in maintenance tasks.
SHORT SOCKET 1-1/8″
Short Socket 1-1/8" used to install / remove screws and nuts in maintenance tasks.
1″ DR SKT 1-3/16 #38 12-SPIN
Socket input 1" measure 1-3/16" used to install / remove screws and nuts in maintenance tasks.
SOCKET INPUT 3/4 MEASURE MEDIDA 1′ 3/16″
Socket input 3/4 measure 1-3/16" used to install / remove screws and nuts in maintenance tasks.
PRESSURE GAUGE
Manometer used to measurement pressure up to 160 PSI in maintenance tasks.
RATCHET, AIR
Pneumatic tool (for 1/4" sockets) used to install / removal screws and nuts in maintenance tasks.
SOCKET SHALLOW 1 3/8″ 12P
Socket Shallow 1-3/8" 12Pts used to install / remove screws and nuts in maintenance tasks.