Used when the fuel tank access is removed. The table has holes to place the fuel access on the table, avoiding the damage of these. Note: Racks are available in the interior of Hangar 1…
APU COMBUSTOR WASH CAR
Used to clean the APU combustor effusion holes while the APU is installed on the aircraft. Must be performed usingone of the two combustor wash nozzles (fixed or rotary), PN:3700546−1 & PN: 3700546−2. Also, the…
RAT Cover
Is used as a protective cover for the blades of the RAT, to protect the blades and personnel when the RAT is deployed.
RIGHT ANGLE PULLING HEAD
This tool was designed to install “-8” diameter CherryMAX fasteners
CRIMPING TOOL 2 AWG
This crimp die is designed to create a mil-spec crimp on a 2 AWG insulated terminal lug. This die will work in the following Hydraulic Crimping Heads, 13642M, 13642, 13400, or any tooling made to…
EXTENSION 1/2″ DRIVE 3-1/2″
Snap-On extension 1/2" Drive 3-1/2" used to help install / remove screws and nuts ins maintenance tasks.
SOCKET, SPLINE, #24 3/4″
#24 Socket Spline 3/4″ used to install / remove screws and nut in maintenance tasks.
SEÑALETICA DE TANQUES ABIERTOS
OPEN TANK SIGNS ARE USED AS A WARNING TO DELIMIT A SPECIFIC AREA.
CRIMP DIE SET 26-10 AWG
The M22520-5-100 Crimp tool features a system of interchangeable dies which eliminate the need of separate fixed die crimp tools for each and every different application. For crimp size 22 thru 10 insulated terminals and…