Used when the fuel tank access is removed. The table has holes to place the fuel access on the table, avoiding the damage of these. Note: Racks are available in the interior of Hangar 1…
TRANSPORTADOR DIG 0-360 G
These angle indicators display highly accurate angle, level, and tilt measurements. They come set at true 0°, but you can choose an alternate zero point with the push of a button. Another button will freeze…
GSE 229 CLIP – TENSION ADJ CTL CABLE
Tool to rigging in the control cables for EMB175, EMB190 & EMB195 aircrafts. It consists of a spring provided with lugs at the extremities to which the control cable is attached to prevent its twisting…
GSE 306 ADAPTERS SET – LEAKAGE TEST, FIR
The GSE consists in a kit with adapters to do the functional test on the cargo compartment fireextinguishing system.
GSE 096 FUEL SAMPLE UNIT
Used to get a sample of the aircraft's fuel. This tool has two bits: one Allen and one Philips. These two bits allow the tool to be used in two types of drain valves: Allen…
DFDR DOWNLOAD UNIT
The L3 Portable Interface (PI) is a handheld portable interface device for data retrievalfrom FA2100 recorders. The user interface, a seven-key keypad and an eight-line display,allows stand-alone operation to perform the following functions: Flight Data…
GSE 364 MECHANICAL FORCE GAUGE (DG-500)
500 x 2.5 lbf force measuring gauge. used in force test application. Measurements are read clockwise (compression) / counterclockwise (tension) on concentric dial for fast observation. Accuracy to within 0.5% of full scale.
GSE 389 IFR 6000 RAMP TEST SET
Used to provide accurate testing and maintenance of ATC transponders, DME, and TCAS systems. The IFR-6000 replaces all the ATC-600A, ATC-601, ATC-601-2, and TCAS-201. Must specified the correct voltages for procurement. For 110 voltages, IFR…