Used when the fuel tank access is removed. The table has holes to place the fuel access on the table, avoiding the damage of these. Note: Racks are available in the interior of Hangar 1…
GSE 306 ADAPTERS SET – LEAKAGE TEST, FIR
The GSE consists in a kit with adapters to do the functional test on the cargo compartment fireextinguishing system.
GSE 096 FUEL SAMPLE UNIT
Used to get a sample of the aircraft's fuel. This tool has two bits: one Allen and one Philips. These two bits allow the tool to be used in two types of drain valves: Allen…
DFDR DOWNLOAD UNIT
The L3 Portable Interface (PI) is a handheld portable interface device for data retrievalfrom FA2100 recorders. The user interface, a seven-key keypad and an eight-line display,allows stand-alone operation to perform the following functions: Flight Data…
GSE 364 MECHANICAL FORCE GAUGE (DG-500)
500 x 2.5 lbf force measuring gauge. used in force test application. Measurements are read clockwise (compression) / counterclockwise (tension) on concentric dial for fast observation. Accuracy to within 0.5% of full scale.
GSE 389 IFR 6000 RAMP TEST SET
Used to provide accurate testing and maintenance of ATC transponders, DME, and TCAS systems. The IFR-6000 replaces all the ATC-600A, ATC-601, ATC-601-2, and TCAS-201. Must specified the correct voltages for procurement. For 110 voltages, IFR…
HOSE BLEEDING BRAKES
Used to remove air bubbles from the landing gear system. The equipment consists of a bleeding hose with a fitting that adapts it to the brake system.
GSE 077 UNIT – HYDRAULIC RESERVOIR SER
The Tronair 06-4005-Series Component Pressure Test Unit is a compact unit designed to provide a source of clean, pressurized fluid for filling reservoirs, bleeding brakes and other maintenance functions. SPECIFICATIONS• Tank Capacity: .90 gal (3.4…