Used when the fuel tank access is removed. The table has holes to place the fuel access on the table, avoiding the damage of these. Note: Racks are available in the interior of Hangar 1…
TORQUE DE CARATULA 3/8″
Dial torque wrench 0 – 150 lb/in. To apply a certain torque to certain parts, such as screws, nuts, etc.
VACUUM GENERATOR
This unit features a vacuum gauge for precise readings and a brass regulator for exact control. Vacuum can be measured Inches Hg or Millibars. Positive Air Pressure of 80-100 PSI is needed to operate this…
ELECTRONIC PISTOL SCREWDRIVER
20V Precision Screwdriver, 3/8 in. square drive, 21 - 106 in lbs, Wireless and USB.
GSE 175 DEVICE – BACKLASH MEASUREMENT
Used to apply forces necessary to measure the backlash of the flight control surfaces (aileron, elevator and rudder). This GSE consists of a dynamometer adapter with a rubber cushioned fork designed to attach to the…
GSE 026 SET – JACKING ADAPTER
Used to insert at the jacking points of the aircraft wings and rear fuselage to assist in jacking the aircraft. This GSE is a steel-made machined part with an inserting pin that fits in the…
TENSIOMETRO Y 3 DADOS
Used to set accurate cable tension during airplane control rigging.