Used when the fuel tank access is removed. The table has holes to place the fuel access on the table, avoiding the damage of these. Note: Racks are available in the interior of Hangar 1…
GSE 431 PLUG LEAKAGE TEST ASSY-SHROUD
Used to carry out the leakage test on the APU fuel feed line shroud.
GSE 405 PLUG-TEST, PRESSURIZATION VALV
Used to help the procedure to do the functional test of the positive-pressure relief valve.
GSE 431 PLUG LEAKAGE TEST ASSY-SHROUD
Used to carry out the leakage test on the APU fuel feed line shroud.
GSE 029 TOOL – SLAT CONTROL LEVER LOCK
Used to hold the SLAT/FLAP control lever in the actuated position.
TORQUE WRENCH 0-250 LB/FT
Dial torque wrench 0 – 250 lb/ft. To apply a certain torque to certain parts, such as screws, nuts, etc.
GSE 233 RIGGING PINS, FLIGHT CONTROLS –
Used to rig the flight controls to the neutral position.
TORQUIMETRO 200-600 LB-FT
Torque wrench 200 – 600 lb / ft. To apply a certain torque to certain parts, such as screws, nuts, etc. Set the desired torque and the wrench indicates when it’s reached with an audible…
GSE 331 GO / NO GO GAUGE –…
Used to support the flap rigging procedure.