Used when the fuel tank access is removed. The table has holes to place the fuel access on the table, avoiding the damage of these. Note: Racks are available in the interior of Hangar 1…
RIGGING BLOCK EQUIPMENT
Used to block the elevator aft quadrant in a 5 degree up or a neutral position during flight control rigging.
PUMP EQP-VACUUM LAVATORY
Used for the removal of build-up on the inner surfaces of the waste line. (Static Soak of Drain Lines)
FLAP CLAMP SET TORQ TUBE – STOCK #00-275
Used to clamp trailing edge flap torque tubes during maintenance to prevent rotation and consequent re-rigging.
RETRACTION EQUIPMENT
Used during maintenance to deactivate the firing pins on the chemical oxygen generators. For after B/E Aerospace Service Bulletin 117003-35-3-1 use C35003.
ACTUATOR SENSOR PROXIMITY
Used to actuate/deactuate proximity sensors (cylindrical, rectangular, and reed) during test procedures. Note for equivalent tool: A27092-84 = (actuator kit P/N KHT8-758-01 and deactuator P/N A32102-5) P/N KHT8-758-01 includes: KHT8-750-01, KHT8-751-01, KHT8-752-01, KHT8-755-01, KHT8-756-01& KHT8-757-01
TOOL, CONTROL COLUMN B757, LOCK ADAPTER,
Used to lock a control column in neutral during override force check.
LOCK T.E. FLAP PWR DRIVE
Used to lock the trailing edge flaps in an extended position to prevent inadvertent operation during maintenance.
ADAPTER – SUMP DRAIN VALVE, REMOVAL/INST
Used to install/remove sump drain valves. Use B28001-2 for 8D111/8D112/6D227 surge/main tank valves and use B28001-5 for 8D136 center tank valves.