Used when the fuel tank access is removed. The table has holes to place the fuel access on the table, avoiding the damage of these. Note: Racks are available in the interior of Hangar 1…
Tool, Swaging Tool
Swaging Tool for the Vibrations Isolators (B60-806844WE) located in the Thrust Reverser Strut Fittings.
Drag Fitting Removal Tool
The tool is used to remove Drag Fitting Fatteners, and prevent aircraft damage.
Safety Barrier, No3 Emergency Door
It is used to prevent injury to personnel when the No. 3 emergency door, left or right is open or removed
Test Equipment – Safety Valve Adapter ( Cabin…
The tool with PN: A21003-1 is used to verifies the correct operation of the pressure relief valve. Where the tool is an adapter between the tool with PN: A21010-190 or 10M-2989 and the integral sense…
PERMASWAGE TOOLING KIT
Kit used for the installation of Deutsch permaswage fittings, this kit contains the -20 (1.25") & 24 (1.5") crimping dies. The pump required for the usage of this kit is the P/N: DLTFRPSKT3001 https://tooling.tomx.com.mx/kit-field-repair-comprehe/ …
CAL. MEASURING PASSDOOR
Tool used to measure the cable that activates the emergency door power reservoir.
Fan Cowl and Thrust Reverser Support Equipment
Used to hold and store the thrust reversers of the PW2000 aircraft engine.
Lock-Out Equipment PCU Elevator
The control lock Assy safeties the elevator control system. The servicing lock assy positions the elevator "full up" for system servicing