Used when the fuel tank access is removed. The table has holes to place the fuel access on the table, avoiding the damage of these. Note: Racks are available in the interior of Hangar 1…
HOSE-TEST LEAK APU FUEL L
Used to isolate and pressurize the shroud. Leakage is shown by the rate of air pressure decay. This hose is used with adapter assembly's for each aircraft and is called out with each adapter.
PLIERS (PINZAS P/REM/INS)
Used to retract the safety firing pins during maintenance of the chemical oxygen generator located in the overhead passenger service units.
TENSIOMETER
Used to set accurate cable tension during airplane control rigging. Range in Lbs. Cable Sizes 150 – 450 1/8, 5/32, 3/16, 7/32, 1/4
AXLE JACK 12 TON.
The Malabar Model 642S Axle Jack is a 12 ton capacity, three stage hydraulic jack designed primarily for use in jacking main and/or nose landing gear of various aircraft. The jack consists of a three…
GSE 389 IFR 6000 RAMP TEST SET
Used to provide accurate testing and maintenance of ATC transponders, DME, and TCAS systems. The IFR-6000 replaces all the ATC-600A, ATC-601, ATC-601-2, and TCAS-201. Must specified the correct voltages for procurement. For 110 voltages, IFR…
DOOR LUBE SET
F72942 is used in conjunction with a customer-furnished grease gun to reach inaccessible flush lubrication fittings on the entry, cargo, service and galley door camshaft bearings.
GAGE EQUIP HYD.BRAKE PRES
Used to check brake pressure after any maintenance to the braking system where the brake line is opened or any component in the braking system is replaced.
TENSIOMETER
Used to set accurate cable tension during airplane control rigging. Range in Lbs. Cable Sizes 10 – 200 1/16, 3/32, 1/8 30 – 200 5/32, 3/16 80 – 200 7/32, 1/4