Used when the fuel tank access is removed. The table has holes to place the fuel access on the table, avoiding the damage of these. Note: Racks are available in the interior of Hangar 1…
DIGITAL ELECTRONIC DEPTH GAUGE
Digital Electronic Depth Gauge, Number of Measuring Rods 1, Range 0 to 6 in., Resolution 0.0005 in./0.01mm, used to make surface depth measurements.
TUBE CLAMP SET
C27022-1 is used to prevent the trailing edge flap drive system from rotating when the torque tubes are disconnected or removed for maintenance.
BEARING SWAGGER TOOL
Tool is used to roller swage bearings by hand with a spanner wrench. The tool kits consist of body assemblies, pilots, spacers, rollers, anvils, bolts, nuts, oil impregnated bronze thrust bearings and retaining rings.
DEFLATOR- TIRE,VALVE CORE REMOVAL
The deflator- tire is suitable for use on Boeing B737 Classic, B737 NG, Embraer and other aircraft wheels which contain a standard bore sized Schrader wheel valve. The Model 2 contains a standard sized screw…
IMPACT SOCKET 12 PTS, 5/8″ X DRIVE 3/8″
Flex Socket, Socket Size 5/8 in, 12-Point, Alloy Steel, Chrome, Standard, Hand, Drive Size 3/8 in used to install / removal screws and nuts in maintenance tasks.
NLG RPLC EQ LOWER SEALS
Used to remove and install the lower bearing seal carrier from the NLG shock strut for replacement of the dynamic and static seals
CROWFOOT WRENCH 1 3/8″
Crowfoot wrench used to remove / install screws and nuts in tight spaces.
ADAPTADOR UVC (PRESION)
COUPLING: HALF,BULKHEAD, QUICK DISCONNECT