Used when the fuel tank access is removed. The table has holes to place the fuel access on the table, avoiding the damage of these. Note: Racks are available in the interior of Hangar 1…
65 DEGREE HOLD OPEN EQPT – T/R COWL
The C78021-1 65 Degree Hold Open Equipment is used to open and hold the thrust reverser cowl at 65 degrees for precooler installation and removal with the engine in place.
STATIC TEST ADAPTER
Nav-Aids, a 33410LH125-4 Boeing 737 Static Test Adapter. To be used with pitot static test set.
ALIGNMENT EQPT – HORIZONTAL STAB INSTL
C55008-1 is used to align the horizontal stabilizer attach bolts during the installation of the horizontal stabilizer.
LOCK SET – FLIGHT SPOILER ACTUATOR
The C27047 lock set is used to hold the number 2 thru 5 or 8 thru 11 flight spoilers in the deployed position during ground maintenance
RIGGING EQUIPMENT – INTERLOCK VALVE CABLE
Rigging Equipment is used to rig the ground spoiler interlock system without jacking the aircraft.
REMOVAL INSTALL EQPT – RUDDER PCU
Is used in conjunction with a customer furnished 200 lb.capacity fishpole hoistand is used to remove and install the rudder PCU aircraft.
WINGLET SLING
The Sling Equipment is used for the installation and removal of the winglet.
Nose Non-Self-Releasing (5,6 & 8) GB714
Used to install Rivets Non-Self-Releasing 5/32, 3/16, 1/4. This nose can install the following kind of rivets: EN6122 & UAB130-EU EN6127 & UAB6127-EU EN6128 & UAB100-EU EN6129 & UABP-EU Recommended Rivet Guns: GB714BBK-10 (GB714) GB722…