Used when the fuel tank access is removed. The table has holes to place the fuel access on the table, avoiding the damage of these. Note: Racks are available in the interior of Hangar 1…
RAMP TEST SET
Used to provide accurate testing and maintenance of ATC transponders, DME, and TCAS systems. The IFR-6000 replaces all the ATC-600A, ATC-601, ATC-601-2, and TCAS-201. Must specified the correct voltages for procurement. For 110 voltages, IFR…
TENSIOMETRO
The series T5 aircraft Tensiometer is a small compact unit designed for determining the tension on aircraft cables. Its use permits the rigging and maintenance of cable loads at the tension specified. Range in Lbs.…
MULTIMETER MOD 4 TRUE RMS
Digital Multimeter with the following specifications: Maximum voltage between any terminal and earth ground: 1000 V rms Fuse protection for mA or µA inputs: 44/100 A, 1000 V FAST Fuse Fuse protection for A input:…
JACK-MLG/NLG (GATO)
The Malabar Model 50P9AR Auto-Retract Axle Jack is a 50 ton capacity, two stage hydraulic jack designed primarily for use in jacking the main and/or nose landing gear of various aircraft. The jack consists of a…
AIR DATA TEST SET
The DPS500 Air Data Test Set is a selfcontained, transportable, fully automated, userprogrammable Pitot-Static tester housed in a military styled enclosure. The unit includes a DPS501 controller, a Pressure/Vacuum pump, and a remote hand-terminal permitting…
BONDMETER / MILLIOHMETER
Used to check resistance of electrical bonding and ground posts (see SWPM 20-20-00). Auto range/test, RS-232 data port, range: 0.01 - 19,999.0 milliohms (0 - 20 ohms), memory, 4 1/2 digit display, accuracy: 0.1% of…
PUSH-PULL GAGE (150 LB.)
200 x 1.0 lbf force measuring gauge. used in force test application. Measurements are read clockwise (compression) / counterclockwise (tension) on concentric dial for fast observation. Accuracy to within 1% of full scale.