Humedad relativa0 a 100 %Temperatura (aire)-40 a 158°F (-40 a 70°C)El dispositivo RHT20 es un registrador de datos de temperatura y humedad que registra hasta 16,000 lecturas de humedad y 16,000 lecturas de temperatura con una…
SLING_HORIZOTAL STABILIZE
Internal manufacturing tool To install and remove horizontal stabilizer. Estimated weight is 1790 lbs with elevators attached. Requires (1) TU-17 grip-hoist, (8) AN4-10A and (8) AN-7A bolts.
TOOL, BUSHING REMOVAL/INSTALLATION
Use to help to replace the NLG AFT door hinge bushings
RESERVOIR SERVICE COUPLING
Used as a connector to fill the hydraulic reservoirs.
LOCKOUT THRUST REVERSER ACTUATOR
The Actuator lock−out pin is used to hold the thrust reverser locking actuator in the unlocked position.
PROTRACTOR ASSEMBLY – CONTROL COLUMN
Used to measure angular motion of various controls during rigging or test. (Equivalent to A27021-30 protractor; Qty 2 A27021-30 in A27021-29 kit).
DRAIN MLG/NLG OLEO STRUT
Used to hold the oil fill valve open in order to drain oil from the main and nose landing gear.
Wrench, Removal Fan Blade Retainer Ring
Used to remove and install fan blade retainer ring from the fan disk.
NLG NITROGEN SERVICE ADAP
To open/close the NLG strut valve and attach hose in order to service it with air or nitrogen. Attention. Use this tool with PN 202317ADLMRO and PN 202318ADLMRO, as applicable.