Humedad relativa0 a 100 %Temperatura (aire)-40 a 158°F (-40 a 70°C)El dispositivo RHT20 es un registrador de datos de temperatura y humedad que registra hasta 16,000 lecturas de humedad y 16,000 lecturas de temperatura con una…
TORQUE WRENCH 0-600 LB/FT
Dial torque wrench 0 – 600 lb/ft. To apply a certain torque to certain parts, such as screws, nuts, etc.
DINAMOMETRO ANALOGO
Used in force test application. Measurements are read clockwise (compression) / counterclockwise (tension) on concentric dial for fast observation. Accuracy to within 1%of full scale.
STRAP WRENCH
Used to remove/install electrical connectors at engine/strut interface. For electrical connectors gripping diameter 0.50" to 2.50", max torque value 164 In-Lbs.
LOCK ASSEMBLY – SPOILER ACTUATOR
Used at individual flight spoiler actuator linkage to prevent inadvertent retraction. Not usable on MD-90 with SB 27-002 incorporated. Not usable on DC-9/MD-80 with SB 27-337 incorporated.
CROWFOOT WRENCH 1-3/16″
Used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can’t reach.
CHECK VALVE DEACTIVATOR
Used to hold open check valve (M913-1 or 4663-8) during heat exchanger and plenum/diffuser assembly cleaning using C21003. Tool allows airplane to provide pneumatic air to run C21003 (as opposed to using a ground air…
ADAPTER JACK FOWARD BODY
Used to adapt forward jacking point to standard tripod jack with 3/4" radius cup.
SPRING EXTENDER
This tool is used to remove/installl the downlock springs on the nose and main landing gear.