la serie de medidores MXG-9 son medidores de espesor ultrasónicos portátiles extremadamente efectivos para medir el espesor de pared de principalmente estructuras metálicas sujetas a corrosión.
REMOVAL INSTALL EQPT – RUDDER PCU
Is used in conjunction with a customer furnished 200 lb.capacity fishpole hoistand is used to remove and install the rudder PCU aircraft.
ELEVATOR FORCE LIMITER DRUM RIGGING FIXTURE
Tool used to apply proper force while making necessary adjustments toelevator force limiter mechanism.
TUBE CLAMP SET
C27022-1 is used to prevent the trailing edge flap drive system from rotating when the torque tubes are disconnected or removed for maintenance.
SIMULATOR, YAW DAMPER MODULE
This simulator is used in place of the yaw damper modules when performing test requiring yaw damper servo input for rudder displacement. This simulator is used airplanes equipped with M522 and M523 (285T0013) Yaw Damper…
EQUIPMENT LEADING EDGE SLAT, INBOARD/OUTBOARD
B27001-51 Rigging eqpt – Le slat inboard/outboardB27001-51 Outboard rigging equipment (slats 1 through 4 and 7 through10) is used on all 757 airplanes.
GSE 257 SLING, RUDDER
Used to supportthe rudder during its removal / installation and to rotate it from the transportation position to its in-flight position.
GSE 162 NEUTRAL SETTING FIXTURE, RIGHT-H
Used to mechanically define the neutral position of the right-hand elevator in relation to the horizontal stabilizer.
GSE 161 NEUTRAL SETTING FIXTURE, LEFT-HA
Used to mechanically define the neutral position of the left-hand elevator in relation to the horizontal stabilizier.