la serie de medidores MXG-9 son medidores de espesor ultrasónicos portátiles extremadamente efectivos para medir el espesor de pared de principalmente estructuras metálicas sujetas a corrosión.
LOCKOUT PIN – TAIL SKID
C32050 is a used to lock the forward and aft lock links of the tail skid in the retracted or extended positions. C32050 is installed if maintenance is performed on or near the tail skid.
RIGHT ANGLE PULLING HEAD
This tool was designed to install “-8” diameter CherryMAX fasteners
TORQUE WRENCH 100-750 lb-pulg.
Torque Wrench 100-750 lb-pulg. To apply a certain torque to certain parts, such as screws, nuts, etc. Unidad: 3/8" Inglés Rango: 100-750 in.lb. Incrementos de rango en inglés: 5 Rango de nm: 14,1-81,9 Incrementos de nm: 0,6
EXTRACTION TOOL
The 1738894-1 is a size-8 Quadrax Extraction Tool suitable for use with the ARINC size 8 Quadrax connectors.
INDICATOR-ANGLE POSITION
The 8810A Angle Position Indicator Measurement Instrument provides two fully independent channels with 0.0001° resolution and 0.004° (Standard)/ 0.001° (Special) accuracy. The 8810A allows all programming to be done via the touch-screen or mouse interface.…
CRIMPING TOOL 2 AWG
This crimp die is designed to create a mil-spec crimp on a 2 AWG insulated terminal lug. This die will work in the following Hydraulic Crimping Heads, 13642M, 13642, 13400, or any tooling made to…
EXTENSION 1/2″ DRIVE 3-1/2″
Snap-On extension 1/2" Drive 3-1/2" used to help install / remove screws and nuts ins maintenance tasks.
DIGITAL FLAP PEEN EQUIPMENT
Digital flap peen equipment is used for Controlled Rotary Flap Peening.